{"product_id":"rcmall-esp32-s2-saola-1r-dev-kit-espressif-development-board-based-wi-fi-mcu-esp32-s2-wrover-with-4mb-flash-and-2mb-psram-micro-usb-cable-pack-of-4-pack-of-2","title":"ESP32-S2 Development Board with 4MB Flash and 2MB PSRAM, Pack of 2 L10981","description":"✨[ Powerful ESP32-S2-Saola-1 ]: ESP32-S2-Saola-1 is a small-sized development board based on ESP32-S2-WROVER module. It is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.✨[ Fetures ] : 3.3V Power On LED, USB-to-UART Bridge, Reset Button, Micro-USB Port, Boot Button, Addressable RGB LED (WS2812), driven by GPIO18.✨[ Easy to Use ] : Most of the I\/O pins are broken out to the pin headers on both sides for easy interfacing. You can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard.✨[ Required Hardware ] : ESP32-S2-Saola-1 , USB 2.0 cable (Standard-A to Micro-B), Computer running Windows, Linux, or macOS. ESP32-S2 series of chips only supports ESP-IDF master or version v4.2 and higher.✨[ What You Get ] : 4 X ESP32-S2-Saola-1R development board ; 1 X 1 Meter Micro USB Cable ; Friendly customer service. Any question please don't hasitate to contact us.\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e ESP32-S2-Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Most of the I\/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard. \u003cb\u003eESP32-S2-WROVER Module:\u003c\/b\u003e ESP32-S2-WROVER is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM. \u003cb\u003ePin Headers:\u003c\/b\u003e All available GPIO pins (except for the SPI bus for flash and PSRAM) are broken out to the pin headers on the board. Users can program ESP32-S2 chip to enable multiple functions such as SPI, I2S, UART, I2C, touch sensors, PWM etc. \u003cb\u003e3.3 V Power On LED:\u003c\/b\u003e Turns on when the USB power is connected to the board. \u003cb\u003eUSB-to-UART Bridge:\u003c\/b\u003e Single USB-UART bridge chip provides transfer rates up to 3 Mbps. Reset Button: Reset button. \u003cb\u003eMicro-USB Port:\u003c\/b\u003e USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-S2 chip. \u003cb\u003eBoot Button:\u003c\/b\u003e Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port. \u003cb\u003eRGB LED:\u003c\/b\u003e Addressable RGB LED (WS2812), driven by GPIO18. \u003cb\u003eSpecifications:\u003c\/b\u003e ESP32-S2-WROVER modules with 4 MB Flash and 2 MB PSRAM USB – 1x Micro USB port for power and programming \/ debugging via USB-to-UART bridge Expansion – 2x 20-pin I\/O headers with SPI, I2S, UART, I2C, touch sensors, PWM, etc… Misc – Boot and reset buttons, compatible RGB LED, 3.3V power on LED Power Supply (3 methods) 5V via Micro USB port (default) 5V and GND header pins 3V3 and GND header pins \u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":51290402029735,"sku":"P353532520068946139","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/0525\/9943\/files\/8a6422a8f1a41bb05c1b347bb23e1f6f0519494fbed3029653b89178e41a4c30.jpg?v=1788429326","url":"https:\/\/norara.shop\/products\/rcmall-esp32-s2-saola-1r-dev-kit-espressif-development-board-based-wi-fi-mcu-esp32-s2-wrover-with-4mb-flash-and-2mb-psram-micro-usb-cable-pack-of-4-pack-of-2","provider":"My Store","version":"1.0","type":"link"}